Crosby® 3/4"-10 x 0.89" Swivel Hoist Ring - HR-125 HWDC Head-Of-Wall Drift-Clip Connectors Aesthetic Design: Octagonal shape provides

Aesthetic Design: Octagonal shape provides a visually appealing retrofit solution

Drill pilot hole through the façade material and into the backup material to the specified embedment depth + 1" using appropriate drill bit(s) in the chart below

or the ends of panel walls

or outdoor stair set

Crosby® 3/4"-10 x 0.89" Swivel Hoist Ring - HR-125 HWDC Head-Of-Wall Drift-Clip Connectors Aesthetic Design: Octagonal shape providesSwivel Hoist Rings are widely used across many rigging and lifting setups. Designed to both pivot and swivel at the base, these hoist rings can freely rotate in sync with the loads movement. While standard eye bolts serve similar lifting purposes, they remain fixed and will lose capacity when subjected to angled loading. As an example, if a gust of wind causes the suspended load to shift during a lift, a swivel hoist ring will turn with the load