TLS Quad Coupler 1.5 PMI-Leadtime Available in three lengths: 8'

Available in three lengths: 8' 2''

Secondary hole for connecting a screw link for an etrier

Energy absorbing design limits fall arrest forces - unique controlled tearing action extends and absorbs energy during a fall

This chain hoist slider is available in Medium and Large sizes to accommodate the most commonly used hoist chain in the industry

TLS Quad Coupler 1.5 PMI-Leadtime Available in three lengths: 8'The Quad Coupler 1. 5 will clamp from 1. 25 OD to 1. 5 OD tubing, as well as 1" pipe (1. 315" OD.) The Quad Coupler 1. 5 is 1. 25" thick. The notch on the outside of clamp is 1. 26" across the flats and will fit over 1 1 4" square tube, while locking the clamp parallel with the 1 1 4" square tubing. Use the flat face to bolt to a fixture, or to allow the Quad Coupler 1. 5 to rotate when fastened to square tubing. The distance from the bottom of the