Simpson MBHAR5.50/11.88 Masonry Hanger - Skewed 45 Degrees Right, Made to Order Non-Returnable PAB Anchor Bolts install the strap(s) vertical and

install the strap(s) vertical and fill all holes

Nails must be driven at an angle through the joist or truss into the header to achieve the table loads

(4) Simpson Strong-Tie SDWH27800G hot dip galvanized timber hex screws

6-lobe drive recess – Secure engagement and longer bit life

Simpson MBHAR5.50/11.88 Masonry Hanger - Skewed 45 Degrees Right, Made to Order Non-Returnable PAB Anchor Bolts install the strap(s) vertical andThe MBHA is a single piece, non welded connector available for solid sawn, truss and engineered wood products. The MBHA hangers feature a G90 galvanized coating which is not designed for use with treated lumber and should not be used for exterior applications. Use all specified fasteners. NOTE: The correct fasteners installed in the correct position must be used to achieve published load values California Residents: WARNING